Progress? What’s That? Oh, That. MGB Sebring Restoration Update

Sometimes you have to admire the method in one’s madness! That is to buy a non-roadworthy car, get it roadworthy, all while trying to deal with a restoration become more of a body conversion! But there was method to my madness for 2 key reasons. The first was I was now using the Chromie as temporary daily transport, after selling my then Peugeot 306 GTi-6 after deeming that too pricey to run; funny really! It also helped my motivation in tackling the massive project the Sebring had now become! Another reason? Thanks to seeing a complete car I now had a vague idea of where the fixings went, as opposed to being sent the ‘right’ screws, only to find out they were wrong, and seeing what the restorers had broken when I first got the car back; the bolts went back into boxes without any marking which really cut my work out!

 

The first thing to do with the Sebring was to refit the Britax sunroof. Because all of the screws were now just an assortment this made life tricky for reaffixing the canvas lid. I only had one screw left! After trying my local screws place they didn’t know either; the threads weren’t the best on this! Eventually, I got hold of a Britax roof specialist who saved me a lot of trouble by sending out the right nuts. Now I had a car that was closer to being watertight!

 

It was however never going to be watertight with the door I acquired years ago! Everyone said it was down to the wing fitment, despite the previous door fitting perfectly. In the end I would source another door as a result of much fettling with the poor door. With the original item bolted up and the reskinned item removed I now had a door that looked like it belonged to the Sebring! Except it was Pageant Blue!

 

DSC_0966
Iy may be the wrong colour but at least the fitment is much improved

 

I also took the opportunity to replace my shot bootlid for the much more solid item, and treated it to new seals all round. With the windscreen fitted in thanks to some parachute cord and helpful friends it was look great for the car! It was time to celebrate! This I did by buying a tired Moto-Lita steering wheel and polishing it until it looked sound once more. Fitted in the car it finally started to show more promise!

DSC_0961

This would admittedly slow a little when I checked the brake pipe to Spax damper conversion clearance on full lock. Finding the supplied Spax damper brake pipes in my assortment would soon cure this issue, where I also took the opportunity to change the rear flexible hose to a braided item, so as to compliment the front end.

But all good things would soon come to a stop. Over a year after I started working on the Sebring again the upper arm decided the remains of the bolt would become at one with the arm! This really was a pain! I resorted to heat, whacking it with hammers and punches to no avail. My sister remembers the hammering sounds! Eventually it would take a lot of heat and a puller to remove the remains of the bolt! Hallelujah! Finally the car was on all 4 weeks again!

 

DSC_0974
How the remains of one bolt would prove to be such a pain!

 

Another issue I had put off was the welding on the car. With my welding supplies from Halfords and an overly dark fixed darkness welding mask it didn’t start well at all! I could not get a consistent feed from the welder! Annoying! Thankfully, a retro rider by the name of Grunty would come down, condemn my welding equipment as rubbish, have me fix my old welding gear before he would begin! Suddenly the car became very solid!

Now I had other issues. The car wanted tuning up badly! The issue was the ignition advance was stuck at 10 degrees throughout the rev range! To add insult to injury it wasn’t moving freely in the engine either for adjustment or removal! With some brute force I soon had the dizzy removed. A short while later, and the car was running well once more. Or so I thought

It was then time to put the car through an MOT. Despite it randomly now puffing out blue smoke and not seeing an MOT for over 10 years how would it all go?

Advertisements